Polycom SoundStructure C16 Design Manual page 75

Step 3 - Device Selection
In Step 3, select the devices that you are using with the design project, as shown in the following figure.
Selecting Devices to be Used with a Design Project
By default, SoundStructure Studio displays the equipment with the minimum list price although it is possible
to manually select the devices by selecting the Manually Select Devices option and adding devices and
optional telephony cards.
You can select different devices by clicking on the device, adjusting the quantity, and clicking "Add". You can
remove devices by selecting the device in the Configured Devices window and selecting Remove.
The unused inputs and outputs display whether additional resources are required to implement the design
and also how many unused inputs and outputs are available.
In this example, a SoundStructure C12 and a single-line telephony interface card are selected to implement
the design. The resulting system has one additional analog input and nine additional analog outputs. The
inputs are used by the eight microphones, one wireless microphone, and the stereo program audio and the
line outputs are used by the stereo amplifier and the mono recorder. The Polycom Video Codec does not
require any analog inputs and outputs because the signals are transferred over the digital Conference Link2
interface.
Polycom, Inc. 75