Polycom SoundStructure C16 Design Manual page 559

Description
This parameter sets the gain (in dB) of the line output.
Examples
Command
set line_out_gain
"Amplifier" -10
Meter Peak Hold Mode—meter_peak_hold_mode
Argument Argument value
Channel Type Global System
Value Type List
Read/Write Mode Read/Write
Values none : Peak Decay
hold : One Second Peak Hold (default)
reset : Infinite Peak Hold Until Reset
Event Source No
Description
This parameter defines the peak hold behavior of all of the peak meters in the system. If the infinite peak
hold mode is selected, the peaks can be reset using the meter_peak_reset parameter.
Meter Peak Reset—meter_peak_reset
Argument Argument value
Channel Type Global System
Value Type Void
Read/Write Mode Write-Only
Event Source No
Description
This parameter resets all of the peak meters in the system, if the peak meters are configured to have the
infinite peak hold behavior.
Polycom, Inc.
Response
val line_out_gain
"Amplifier" -10
Description
Sets the line_out_gain on the output channel "Amplifier"
to -10dB.
559