Using Multiple Soundstructure Telephony Interfaces - Polycom SoundStructure C16 Design Manual

_Ceiling Mic Mute Event
Unmute
Volume

Using Multiple SoundStructure Telephony Interfaces

Multiple SoundStructure telephony interfaces are supported with the Polycom Touch Control as follows:
• When a SoundStructure VoIP Interface is used, only the first registered VoIP line can be dialed with a
Polycom Touch Control. Additional lines are ignored.
● When multiple telephone calls are active in the system, the SoundStructure telephony lines are used
sequentially, as sorted alphabetically by the telephone line virtual channel names.
● The first telephone line will be used when the user dials the first phone call. Subsequent phone lines
will be used if the user adds another call to the existing call by pressing
● Once all the SoundStructure telephone interfaces are in active calls, no more telephone calls may be
added to the system. If the user tries to add another call, a message indicating that the "meeting is
full" will be displayed. This means that no more calls may be added to the system.
● All calls may be hung up at the same time or alternatively individual lines, displayed by virtual channel
name, may be hung up.
See the User's Guide for SoundStructure Systems and the Polycom Touch Control
about using the Polycom Touch Control.
Note: Multiple Phone Lines Not Controlled Separately with Polycom Touch
Control
While multiple SoundStructure telephony interfaces are supported, multiple calls
are assumed to be used in the same room. Multiple independent telephone are
used sequentially when multiple callers are brought into the conference. Multiple
phone lines cannot be controlled independently (for example combined and divided
room applications) with the Polycom Touch Control.
When
Using Multiple Polycom Touch Controls with SoundStructure
After a Polycom Touch Control has been designed in the system and the events are created, multiple Poly-
com Touch Controls may be paired with the SoundStructure system and used to control the SoundStructure
system. An application where multiple Polycom Touch Controllers would be useful would be in a large room
where multiple locations in the room would like to have dialing, volume, and mute control.
Polycom, Inc.
_Ceiling Mic A Mute Event
_Ceiling Mic B Mute Event
_Ceiling Mic C Mute Event
...
SoundStructure
Maps mute of individual microphones to Mute
.
Add Call
for additional information
299