Cameras; Select Cameras; Adjust Cameras; Switch Between Cameras - Polycom RealPresence Group Series User Manual

Cameras

You can adjust available cameras in several ways.

Select Cameras

You can use the remote control to select and adjust the main camera or other near-end or far-end video
sources.
You might be able to adjust other auxiliary cameras that support pan, tilt, and zoom movement. You can
adjust a far-end camera only in a call and only if the far end allows it.
T
ASK
1 Navigate to
2 Then select Near Cameras for near-end control or Far Cameras for far-end control.

Adjust Cameras

After you select a camera, you can make some adjustments to enhance the view.
Note: Before you can adjust the EagleEye Director camera, you must turn camera tracking off.
To adjust a Polycom EagleEye III, Polycom EagleEye IV, Polycom EagleEye Acoustic, or
Polycom EagleEye Director using the remote control:
T
ASK
1 Select either a near-end or far-end video source to control.
During a multipoint call being hosted by a system in the call, you can adjust a camera only at the far
end that has a current speaker.
2 Press the navigation buttons on the remote control to move the camera up, down, left, or right.
3 On the remote control, press

Switch Between Cameras

You can switch to controlling the far-end camera or the near-end camera in a call.
T
ASK
1 Press .
2 Select Camera, then select

Allow the Far-End System to Control Your Camera

If your system administrator has allowed access to user settings, you can let the far-end system control your
camera.
If their systems support presets, far-end participants can also set and use presets for your camera.
Polycom, Inc.
Camera > Select Camera.
to zoom out or
Near Camera or
Using a Polycom RealPresence Group Series Remote Control
to zoom in.
Far Camera.
28