Polycom SoundStructure C16 Design Manual page 176

See the Polycom SoundStructure and HDX Microphones Best Practices Guide
using Polycom microphones with SoundStructure devices.
SKUs and Cables for Polycom Tabletop Microphones
SKU
2215-23327-001
2215-23809-001
2215-23809-002
2215-23810-001
2215-23810-002
For reference, the Walta connector is the flat connector that is on the side of the tabletop microphone arrays
and the RJ45 connector is compatible with the connectors on the rear of the SoundStructure device and on
the digital ceiling microphone array.
The digital tabletop microphone arrays are connected via Walta terminated cables and then the last cable
is terminated into the SoundStructure via the Walta to RJ45 interface cable.
The digital ceiling microphone arrays are connected via RJ45 terminated cables and may be connected
directly to the rear-panel of the SoundStructure.
The maximum length of all the conference link cables should not exceed 175 ft and no single run of cable
should exceed 100 ft.
Note: Maximum Length of Conference Link Cables
The maximum length of all conference link cables should not exceed 175 ft
and no single run of should exceed 100 ft.
A summary of the cables is shown in the following table. The pin outs for the RJ45 terminated cables
2457-24008-001 and 2457-24009-001 are shown in Specifications. Both of these cables have the same pin
out and differ only in length.
Conference Link2 Cables and Descriptions
Clink2 Cable
2457-23716-001
2457-23215-001
2457-23216-001
2457-24008-001
2457-24009-001
Polycom, Inc.
Description
Tabletop microphone array with 25' Walta to Walta cable
Black ceiling microphone array kit
White ceiling microphone array kit
Black ceiling microphone array extension kit
White ceiling microphone array extension kit
Cable Description
RJ45 to Walta connector converter. Typically included with the HDX 9000 series video
systems.
Walta to Walta cable, 15 ft length
Walta to Walta cable, 25 ft length. Included with the Polycom table microphone arrays.
RJ45 to RJ45, 50 ft length, cross-over cable. Part of the Polycom ceiling microphone
array package.
RJ45 to RJ45, 25 ft length, cross-over cable. Part of the Polycom ceiling microphone
array extension package.
for more information on
176