Viewing Push To Talk Microphones With Leds Example - Polycom SoundStructure C16 Design Manual

run. If it is determined once the switch is installed that the switch logic is reversed and the split preset should
be called when the switch is open and the combined preset when the switch is closed, then the triggers or
the actions may be easily reversed on the events. To edit an event, double click the event.

Viewing Push To Talk Microphones with LEDs Example

In this example, the push to talk button on a microphone is used to mute all microphones in room and the
status LED on the microphone is illuminated when the microphone is unmuted.
This example assumes that the microphone is already part of the system and now the logic inputs and
outputs are manually added to the existing system. If this is a new system, then use the logic input and logic
output modes on the edit channels control to automatically add the logic inputs and outputs and events when
the microphone inputs are defined.
Polycom, Inc. 256