Configuring The Polycom Touch Control Lan Properties - Polycom SoundStructure C16 Design Manual

To access Admin settings, touch the screen and move from right to left to access the Administration icon
.
The Administration page requires a login and password, as shown in the figure below. The default login is
Admin and the default password is 456.
. Administration Login Page

Configuring the Polycom Touch Control LAN Properties

To configure Polycom Touch Control LAN settings:
1 From the Home screen, touch
2 Touch the LAN Properties tab.
3 Configure the following IP Address (IPv4) settings:
IP Address Settings
Setting
Set IP Address
IP Address
Polycom, Inc.
.
Description
Specifies how the Polycom Touch Control obtains an IP address.
• Obtain IP address automatically — Select if the Touch Control gets an IP
address from the DHCP server on the LAN.
• Enter IP address manually — Select if the IP address is not automatically
assigned.
If the Polycom Touch Control obtains its IP address automatically, this area
displays the IP address currently assigned to the Polycom Touch Control. If
you selected Enter IP address manually, enter the IP address here.
291