Polycom SoundStructure C16 Design Manual page 665

Signal Generator Sweep Start
Argument Argument value
Channel Type Virtual Channel
Value Type Floating-Point
Read/Write Mode Read/Write
Phys Chans Signal Generator
Virt Chans Mono
System Limits Minimum: 20.0, Maximum: 20000.0, Resolution: 0.1
Default 20.0
User Limits No
Supported
Event Source No
Description
When the signal generator's sig_gen_type is set to sweep, this parameter sets the frequency (in Hz) at
which the sweep generator begins. The direction of the frequency sweep will be up or down depending on
whether this parameter is higher or lower than the sig_gen_sweep_stop parameter.
Polycom, Inc.
Frequency—sig_gen_sweep_start
665