Using Trim - Polycom SoundStructure C16 Design Manual

Hide thumbs Also See for SoundStructure C16:

Table of Contents

The option for the delay compensation displays when the Line Input or Bypass ungated signal type is

selected, as shown in the following figure.

Line Input or Bypass Ungated Signal Type Delay Compensation Option

Using Trim

The trim command is used with stereo virtual channels to provide additional gain or attenuation in the analog

domain to the underlying left or right physical channels in case the incoming signal levels need to be

adjusted separately. As shown in the following figure, there are two trim knobs for stereo virtual channels

and no trim knob for mono virtual channels.

Polycom, Inc.