Polycom SoundStructure C16 Design Manual page 243

Hide thumbs Also See for SoundStructure C16:

Table of Contents

receiver. To use the IR remote transmitter, add a Polycom IR remote to the project and connect the receiver

physically to the SoundStructure as shown in the following figure.

IR Remote Receiver Connected to SoundStructure Device

All the keys on the IR remote may be used as sources of events. The individual keys are selected in an

event by specifying a trigger that is equal to the key of interest. The entire set of key presses that may be

defined are shown in the following figure (left) and the default key mappings that are created automatically

are shown on the right.

Polycom, Inc.

Troubleshooting