Polycom SoundStructure C16 Design Manual page 296

Hide thumbs Also See for SoundStructure C16:

Table of Contents

Polycom Touch Control causes Events to be created

SoundStructure Studio will automatically create the appropriate integration events when a Polycom Touch

Control is added to the SoundStructure Studio project. The events that are created are the same events that

would be created automatically if a Video Codec system were added to the SoundStructure Studio project.

In this system, a Polycom microphone channel and a SoundStructure PSTN telephony channel are also part

of the project and there are events that were created to support those channels. See

Connecting Over Con-

ference Link2

for information about the events that are created for microphones and SoundStructure

telephony channels.

The events that are created by SoundStructure Studio specifically for the Polycom Touch Control are shown

in the following figure and described below. These events are sorted by their input virtual channel names.

. Polycom Touch Control Events

_Polycom Video Codec to SST Volume

The '_Polycom Video Codec to SST Volume' event maps the volume information from the Polycom Touch

Control volume slider to the fader parameter of the channel called "Amplifier".

Polycom, Inc.

Troubleshooting