Use The Realpresence Touch To Generate A Flash Hook Command - Polycom SoundStructure C16 Design Manual

Use the RealPresence Touch to Generate a Flash Hook
Command
You can execute a flash command in a call. The Flash command places the phone line on-hook for a
proscribed time, restores it to off-hook, then the Private Branch Exchange (PBX) responds with a secondary
dial-tone for adding another call participant. PSTN TEL1 and TEL2 interfaces are supported.
To execute the Flash Hook command:
1 On the Call screen, while in a call, to flash the first SoundStructure telephony interface, tap Flash.
2 Dial the desired numbers.
Regardless of the number of SoundStructure telephony interfaces in a call, the flash
Note:
button only flashes the first telephony interface as sorted by the phone line's virtual channel
name.
Polycom, Inc.
®
Using the Polycom RealPresence Touch
™
with a SoundStructure System
283