Polycom SoundStructure C16 Design Manual page 683

Digital GPIO Pin held
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read-Only
Phys Chans Digital General Purpose I/O Input
Virt Chans Control
Event Source Yes
Description
This parameter indicates when a digital input pin is held. It is similar in functionality to the ir_key_held
parameter. The hold time and repeat time are specified by the digital_gpio_hold_time and
digital_gpio_repeat_time parameters. When the pin is held for the hold time, a status message will be
generated. If the pin remains held, status messages will be generated with a period equal to the repeat time.
Digital GPIO Pin Hold
Argument Argument value
Channel Type Virtual Channel
Value Type Integer
Read/Write Mode Read/Write
Phys Chans Digital General Purpose I/O Input
Virt Chans Control
System Limits Minimum: 0, Maximum: 10000
Default 0
User Limits No
Supported
Event Source No
Description
This parameter specifies the amount of time (in milliseconds) that a GPIO pin must be held for the first
digital_gpio_held status message to be sent. Setting this parameter to 0 indicates that digital_gpio_held
messages will not be generated.
Polycom, Inc.
Status—digital_gpio_held
Time—digital_gpio_hold_time
683