Removing Authentication From A Soundstructure System - Polycom SoundStructure C16 Design Manual

If the entered password does not match the system password, an error message displays,as shown next.
Authentication Failed Dialog
If the password is correct, SoundStructure Studio connects to the system and the system displays as
Authenticated, as shown in the following figure.
Authenticated SoundStructure System
Removing Authentication from a SoundStructure
System
To remove authentication from a SoundStructure System, set the Authentication mode to open and click
Apply. SoundStructure Studio will reconnect to the system using port 52774.
The password in an open system will still be retained, but will not be required to connect to the system when
it is open mode.
Polycom, Inc. 394