Creating Advanced Applications
This chapter describes several applications of the SoundStructure products and the steps required to create
these applications. These applications include the following conferencing applications:
●
Creating a One Microphone And Mono Video Conferencing System
●
Creating Four Digital Array Microphones and A SoundStation VTX1000 Conferencing System
●
Creating an Eight Microphones, Video, and Telephony Application Conferencing System
●
Creating a Two PSTN Line Positional "Receive" Audio Conferencing System
●
Creating an Eight Microphones and Stereo Video Conferencing System
●
Creating an Eight Microphones with The Polycom Video Codec Conferencing System
●
Creating an Eight Microphones with Wireless and Lectern Microphones Reinforcement Conferencing
System
●
Creating a Sixteen Microphones with Six-Zone Sound Reinforcement Conferencing System
●
Creating a Room Combining Application Conferencing System
Creating a One Microphone And Mono Video
Conferencing System
This simple example is designed to show how to get started designing with the SoundStructure products. In
this example, one microphone and a Polycom VSX8000 are used with a SoundStructure C8 device.
The block diagram of this system is shown in the following figure. The channel names are labeled with the
virtual channel names that are created by default by the SoundStructure Studio software.
Block Diagram for One Microphone and Polycom VSX8000 with SoundStructure C8
Table Mic 1
VSX8000 In
Before proceeding with the design, install SoundStructure Studio software from the CD-ROM supplied with
your SoundStructure device or download the latest version from the Polycom website. Launch the
SoundStructure Studio software and select New Project from the File menu.
Polycom, Inc.
SoundStructure
C8
Amplifier
VSX8000 Out
400