Table of Contents
Advertisement
MITSUBISHI CNC
4 Edit Screens
4.4.4 Comparing Files (Compare)
This chapter explains method used compare files after transferring.
Refer to "4.5.2 Selecting a Device, Directory, and File" for details of the device, directory, and file specification method.
Operation method
Use the [ ← ] or [ | ← ] key to select file setting
(1)
column A.
Designate the device, directory and file name to be
(2)
compared.
Use the [ → ] or [ → | ] key to select file setting
(3)
column B.
Designate the other device, directory and file name
(4)
to be compared.
(5)
Press the menu [Compare A:B].
(Note 1) Files that can be compared are text files only.
Correct outcome will not be obtained through binary file comparison.
(Note 2) In a file comparison, even if "#8936 Delete leading 0" is set to "1", when comparing one separate file that
contains one program, "0" at the head of the program name is not deleted. Designating the file name is
required.
However, in the case of serial/batch file, comparison is carried out with deleting "0" at the head of the program.
I - 272
The designated file name appears in file setting column A.
The designated file name appears in file setting column B.
The file comparison starts.The input data and comparison data
appear in the input/comparison data display area.
A message appears when the comparison is completed.
If a comparison error occurs, the block with the error is
displayed in the comparison data display column on the
screen.
Advertisement
Table of Contents
