Chapter 24 Display And Operation Settings (Got Set Up); Display Settings; Display Setting Functions - Mitsubishi Electric GOT SIMPLE Series Operation Manual

24
DISPLAY AND OPERATION SETTINGS (GOT
SET UP)
The setting screens related to the display or operation can be displayed from the utility screen.
In the setting screen for display and the setting screen for operation, the following settings can be set.
Item Description

Display settings

Setting the title display period and screen saving time
Brightness
Operation settings Setting buzzer volume, window move buzzer, and key reaction speed
Touch panel calibration
Utility call key
24.1
Display Settings

Display setting functions

Display-related settings can be configured.
The following items can be set. Touch each item to make the settings configurable.
Item Description
Opening time The title display period at the main unit boot can be set.
Screen save time The period from the user stops the touch panel operation till the screen save function
starts can be set.
Brightness Brightness can be adjusted.
Page 223 Brightness
*1 Even if 0 is set, the title screen is still displayed. The title screen is always displayed for 4 seconds or more (depending on the project
data).
• Display setting by GT Designer3
Set title display period, screen save time and screen save backlight by selecting [Common]
Environmental Setting]
When change a part of the setting, change the setting by the GOT display setting after downloading the
project data.
GT Designer3 (GOT2000) Screen Design Manual
• Screen save time
By using the system information function, the screen save function can forcibly enabled from a controller
(Forced Screen Saver Disable Signal) or the screen saving time set in the utility can be disabled (Automatic
Screen Saver Disable Signal).
GT Designer3 (GOT2000) Screen Design Manual
[GOT Setup] on GT Designer3.
24 DISPLAY AND OPERATION SETTINGS (GOT SET UP)
Reference
Page 221 Display setting functions
Page 226 Setting operation of operation
Page 227 Position correction of the touch panel
(touch panel calibration setting)
Page 229 Setting the utility call keys
Setting range
*1
0 to 60 seconds
(At factory shipment: 5 seconds)
0 to 60 minutes
(At factory shipment: 0 minute)
-
24.1 Display Settings
24
[GOT
221