Delta EtherCAT Programming Manual page 450

EtherCAT Programming Guide
Returned
value
(Decimal)
12290 ERR_ECAT_SECURITY_CONNECT
32825 ERR_PATH_ECAT_NEED_ENABLE
32826 ERR_PATH_ECAT_ECAM_ENABLE
ERR_PATH_ECAT_ECAM_
32827
MASTERSOURCE
53248 ERR_RTX_RTSS_LOAD
53249 ERR_RTX_CONNECT_LINK_ FAILED
53250 ERR_RTX_EVENT_FAILED
53251 ERR_RTX_CONNECT_FAILED
53252 ERR_RTX_CONFIG_EDITED
53253 ERR_RTX_SECURITY_FAILED
53254 ERR_RTX_COMMANDING
53255 ERR_RTX_SYSTEM_NOT_ SUPPORT
53256 ERR_RTX_NOT_SUPPORT
53257 ERR_RTX_THREAD_CREATE_ FAILED
53258 ERR_RTX_RTSS_START_FAILED
ERR_RTX_WIN32_SYSTEM_NOT_
53504
SUPPORT
53505 ERR_RTX_CALLBACK_CLOSE
53506 ERR_RTX_CALLBACK_FUNCTION
53507 ERR_RTX_CALLBACK_THREAD
53760 ERR_RTX_ERRORLOG_NOT_ ENABLE
ERR_RTX_ERRORLOG_COUNT_
53761
ERROR
57344 ERR_CARD_NO_FOUND
March, 2017
Name of the error code Description
This function fails to access the security
kernel.
This API requires to be enabled.
This API cannot be executed when E-cam is
enabled.
The master axis of E-cam is not set.
RTSS cannot be enabled/disabled correctly.
Fail to access RTSS shared memory or the
license verification is failed.
Fail to access the RTSS event.
Failure of handshaking with RTSS shared
memory.
Restarting the computer is required to activate
the default setting of RTX.
The RTX license you are using might be a
piracy.
No response when RTX special command is
issued.
This API is not supported by RTSS.
The API is not supported by this RTX version.
Fail to enable communication status of RTX
thread
Fail to enable the RTX system.
The callback function is not supported by
Win32 system.
Modifying the callback function is not allowed
when it is enabled.
Callback function cannot be enabled due to
setting error.
When callback function is enabled, the thread
is not correctly executed.
Auto recording function is not enabled.
The specified index of error count is wrong.
Motion card is not found.
Error Code Description
34
34-7