User and Installation Manual, DE212 GLOBAL ONTENTS INTRODUCTION ..............................3 ............................3 YSTEM HIGHLIGHTS ............................3 YSTEM CONFIGURATION INSTALLATION ..............................4 ..........................4 NSTALLATION OF THE RECEIVER Figure 2.1 Receiver and Transmitter in the drivers cabin........................................... 5 ECEIVER ONNECTIONS SW2..................8...
Integrated system, all you need for a safe Deadman operation is included. • Several Delta wireless systems can operate in the same area without disturbing each other. • Wireless operation improves efficiency and operational safety. No cable length limitations to move around the aero plane and no cable to brake.
User and Installation Manual, DE212 GLOBAL 2. I NSTALLATION NSTALLATION OF THE RECEIVER Installation in drivers cabin External long range antenna (Optional) Figure 2.1 Receiver and Transmitter in the driver’s cabin The receiver unit with antenna is normally installed in the driver’s cabin, out of EX defined area.
User and Installation Manual, DE212 GLOBAL ECEIVER ONNECTIONS All connections to the Deadman system are made in the receiver unit. Receiver connections HF-module Antenna connection Receiver connector P1 Receiver connector P3 Timer Beeper output External override 2. Timer Warning output 2.
Page 6
User and Installation Manual, DE212 GLOBAL Connector Functional description Receiver function P1 in receiver Select, SW2 Timer beeper output SW2-1: 2 min. timer ON/OFF ON= timer active, OFF=No timer Timer warning output SW2-2: Extra function. Simultaneous or no simultaneous operation with the Deadman function.
Page 7
User and Installation Manual, DE212 GLOBAL Receiver connections, connector P3: Functions installed with receiver software program: 02046 Conn. Functional description External override SW2-3 : External override The Deadman function is active as long as this input is ON= Ext. override active. OFF=Ext.
User and Installation Manual, DE212 GLOBAL 2.3 C SW2. HANGING THE FUNCTION OF THE RECEIVER UNIT BY The function of the receiver unit can be changed according to operational requirements. The following can be changed: • SW2-1: Timed or no timed Deadman. ON is activated.
User and Installation Manual, DE212 GLOBAL EX CERTIFICATION. The handheld unit, the TX212 transmitter is Ex approved, to verify this, look at the identification label located under the handle. Note that the certification is no longer valid if the TX212 is repaired by an un-authorized workshop, or if the instruction given in this document is not followed.
Approx. 14 cm long antenna for installation on top of the receiver. OPTIONAL: external antenna with 1,5m cable for external mounting. • Delta CH300, 115/ 230V mains-powered battery charger for transmitter, OPTIONAL. See section 5.2. RC AS Page 10 of 36...
The battery is charged by the stainless steel contacts at the back side of the transmitter. The transmitter must be charged on the charge station on the receiver front panel, or on a mains battery charger, CH300 delivered by Delta. The charging connections, are protected from discharging of the built-in battery.
User and Installation Manual, DE212 GLOBAL The Stop button turns off the functions in the transmitter and sends an active STOP, turning instantly off all the functions activated in the receiver. If the Deadman button is stuck, and the Stop-button is pressed, the transmitter cannot be operated again before the damaged button or switch is changed.
To keep the classification, and the security, the TX212 unit should be inspected regularly. In case of a damage of the TX212, it should be send for repair to Delta RC AS or an appointed service station immediately. All services and repairs of the unit, will be stored at the repair station, and by Delta RC AS store. In case of an accident, it is possible to see the “history”...
This means that repair of the TX212 must take place at Delta RC AS or by a Delta RC AS appointed dealer. Otherwise ATEX certificate is no longer valid.
The battery module 02465 and all replaceable parts of the transmitter, must be original parts delivered by Delta RC AS. Otherwise the Ex certifications are lost, and the customer has to take all responsibilities. The operator is only allowed to change the battery module, nothing else.
The DE212 is a deadman control system designed for aero plane refuelling trucks and dispensers. Both the receiver and transmitter are controlled by a microprocessor, making it possible to tailor special functions for a customer. The following units of the DE212 GLOBAL are available Order number Functional description 02705 Transmitter TX212-2S Global2 2,4GHz with 1 extra function.
User and Installation Manual, DE212 GLOBAL 5.3.1 Receiver front unit, parts identification Input voltage fuse HF module Main connector P1 Auto fuse 5A connectors Connector P3 Main printed circuit board HF module Antenna # 02345 Function select (If applicable) # 02052 connector 5.3.2 Transmitter parts identification...
NOTE: DE212 transmitters, TX212-2S are Ex, ATEX/IECEx approved. This means that repair work on the transmitters must be performed by Delta RC AS or by a Delta RC AS appointed repair workshop. If repair of a Ex approved part is done by a non-appointed repair workshop, the Ex approval is lost, and the customer must take all responsibility.
User and Installation Manual, DE212 GLOBAL GENTS Thailand Aviation Enterprise Co. 54/116 Soi3. Baranee Village Klongsam. Klongluang, Pathum Thanee 12120 Bangkok Thailand Phone: +6628327253 Fax: +6625997662 E-mail: aviation_enterprise@yahoo.com France Marco Tech 5, Rue Jean Jaures FR-33310 Lormont France Phone: +33557306300...
User and Installation Manual, DE212 GLOBAL ECHNICAL This equipment complies with the following standards: Europe/EU: ERC 70-03 EN 300-400. USA: FCC 15.249. Japan: STD-T66. It is in accordance to EU’s demands in order to label the equipment with CE. Transmitters are ATEX/IECEx approved, according to: EN 50 014:1997+A1+A2. EN 50 020:2013 and For the EU : II 2 G Ex ib IIC T4, EN 60079-0:2012 + A11:2013 and EN 60079-11:2012 IECEx: IEC 60079-0 Ed.6 and IEC 60079-11 :2011...
Page 22
User and Installation Manual, DE212 GLOBAL Transmitter • Output Power: max. 1mW. • Antenna: Internal. • Power Supply: 3,6 V NiMH battery, 300mAh. Rechargeable by external contacts. • Charging Constant current charging, 50mA controlled by charging station on receiver front panel.
User and Installation Manual, DE212 GLOBAL IMENSIONS Receiver and transmitter unit Note: All dimensions in mm. RC AS Page 33 of 36 ELTA Document 02743...
Page 34
Transmitter unit Note: Dimensions in mm. Delta RC AS reserves the right to make changes without further notice to the product, to improve reliability, functions and design. Delta RC AS does not assume any liability arising out of the application or use of the product if used according to this document.
User and Installation Manual, DE212 GLOBAL NVIRONMENTAL INFORMATION Care has been taken while producing this units, to ensure that all excess materials are disposed properly, and recycled accordingly. Please help us with this process in the future. This means: Do not dispose this devices into the trash when discarding.
Page 36
Delta RC AS reserves the right to make changes without further notice to the product, to improve reliability, functions and design. Delta RC AS does not assume any liability arising out of the application or use of the product if used according to this document.