Ecat_Master_Get_Initial_Errorcode - Delta EtherCAT Programming Manual

Master Initialization

6.13 _ECAT_Master_Get_Initial_ErrorCode


Syntax
6 U16 PASCAL _ECAT_Master_Get_Initial_ErrorCode(U16 CardNo)

Purpose
This is for acquiring the error code when error occurs ("_ECAT_Master_Check_Initial_Done"
returns 99). Refer to Chapter 34 for more information about error code description.

Parameter
Name
CardNo

Example
U16 Status;
U16 CardNo = 0;
U16 Cardnum = 0;
U16 InitDone = 100;
Status = _ECAT_Master_Open(&Cardnum);
for (U16 CardSeq = 0; CardSeq < Cardnum; CardSeq ++)
{
Status = _ECAT_Master_Get_CardSeq (CardSeq, &CardNo);
Status = _ECAT_Master_Initial(CardNo);
while (InitDone != 0)
{
if (InitDone == 99)
{
}
}
}
6-16
Data type Property
U16 Number
Status = _ECAT_Master_Check_Initial_Done(CardNo, &InitDone);
// Error
Status = _ECAT_Master_Get_Initial_ErrorCode(CardNo);
break;
Description
Card No.
EtherCAT Programming Guide
March, 2017