Tacacs+ Server Setup - ZyXEL Communications MSC1000G User Manual

Management switch card
Hide thumbs Also See for MSC1000G:
Table of Contents

Advertisement

Table 313 RADIUS Server Setup (continued)
LABEL
Mode
Timeout
Index
IP Address
UDP Port
Shared Secret
Delete
Apply
Cancel

14.10.6 TACACS+ Server Setup

Use this screen to configure your TACACS+ server settings. See
more information on TACACS+ servers. Click the TACACS+ Advanced button in the Sys > AAA
screen to view the screen as shown.
Management Switch Card User's Guide
DESCRIPTION
This field is only valid if you configure multiple RADIUS servers.
Select index-priority and the system tries to use the first configured RADIUS server for
accounting, if the RADIUS server does not respond then the system tries to use the second
RADIUS server.
Select round-robin to alternate between the RADIUS servers to which it sends accounting
requests.
Specify the amount of time in seconds that the system waits for an accounting request
response from the RADIUS accounting server.
This is a read-only number representing a RADIUS accounting server entry.
Enter the IP address of an external RADIUS accounting server in dotted decimal notation.
The default port of a RADIUS server for accounting is 1813. You need not change this value
unless your network administrator instructs you to do so.
Specify a password (up to 32 alphanumeric characters) as the key to be shared between the
external RADIUS accounting server and the system. This key is not sent over the network.
This key must be the same on the external RADIUS accounting server and the system.
Check this box if you want to remove an existing RADIUS accounting server entry from the
MSC. This entry is deleted when you click Apply.
Click Apply to save the changes in this screen to the system's volatile memory. The system
loses these changes if it is turned off or loses power, so use the Config Save link on the
navigation panel and then the Save button to save your changes to the non-volatile memory
when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Chapter 14 Sys Screens
Section 14.10.2 on page 577
for
583

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msc1024gMsc1224gMsc1024gbMsc1024gcMsc1224gb

Table of Contents