ZyXEL Communications MSC1000G User Manual page 245

Management switch card

Hide thumbs Also See for MSC1000G:

Table of Contents

Figure 152 Port > VDSL2

The following table describes the fields in this screen.

Table 109 Port > VDSL2

VDSL2 Template

Alarm Template

Limit Profile

Management Switch Card User's Guide

Select the number of a line card's slot. The corresponding subscriber port setup screen for

the type of line card you selected automatically displays.

Select the number of a DSL port on the line card.

Click Load to display the port's settings in the fields below.

Select this check box to turn on this port.

Select a VDSL2 template profile of VDSL2 settings to assign to this port. Use the Profile >

VDSL2 screen to configure VDSL port profiles.

Select an alarm profile to define the thresholds that trigger an alarm on the port when

exceeded.Use the Profile > Alarm VDSL2 screen to configure VDSL alarm template

Select a rate limit profile to apply to the subscriber connected to this port. The profile sets

maximum speed settings for traffic coming from or going to the subscriber. See

11.26 on page 406

for how to configure a profile.

Select a profile of per-queue rate limiting parameters to assign to this port.

Chapter 9 Subscriber Port Setup Screens

Show Quick Links

Table of Contents

Troubleshooting

Msc1024g Msc1224g Msc1024gb Msc1024gc Msc1224gb