Vdsl2 Pvc - ZyXEL Communications MSC1000G User Manual

Table 143 E1 Port Setup: Advanced (continued)
LABEL
Apply
Cancel

9.31 VDSL2 PVC

Click Port > VDSL2 PVC in the navigation panel to open the VDSL2 PVC Setup screen. Use this
screen to configure PVC settings for individual ports.
Figure 202 Port > VDSL2 PVC
The following table describes the fields in this screen.
Table 144 Port > VDSL2 PVC
LABEL
Slot
Port
Management Switch Card User's Guide
DESCRIPTION
Click Apply to save the changes in this screen to the system's volatile memory. The system
loses these changes if it is turned off or loses power, so use the Config Save link on the
navigation panel and then the Save button to save your changes to the non-volatile
memory when you are done configuring.
Click Cancel to begin configuring the screen again.
DESCRIPTION
Select the number of a line card's slot. The corresponding subscriber port setup screen for the
type of line card you selected automatically displays.
Select the number of a DSL port on the line card.
Chapter 9 Subscriber Port Setup Screens
309