Profile Alarmshdsl Delete Command - ZyXEL Communications MSC1000G User Manual

30.8.3 profile alarmshdsl delete Command

Syntax:
profile alarmshdsl delete <profile>
where
<profile>
This command allows you to delete an individual SHDSL alarm profile by its name. You cannot
delete the DEFVAL alarm profile.
The following example deletes the SESalarm alarm profile.
ras> profile alarmshdsl delete SESalarm
30.8.4 profile alarmshdsl map Command
Syntax:
profile alarmshdsl map <profile>
where
<profile>
This command displays which SHDSL ports are set to use the specified alarmshdsl profile.
The following example displays which SHDSL ports use the SESalarm alarmshdsl profile.
ras> profile alarmshdsl map SESalarm
30.9 profile alarmvdsl Commands
Configure alarmvdsl profiles to set alarm settings and thresholds for the VDSL ports.
30.9.1 profile alarmvdsl show Command
Syntax:
profile alarmvdsl show [<profile>]
where
<profile>
Management Switch Card User's Guide
=
The name of an alarm profile.
=
The name of an alarm profile.
= The name of an alarm profile.
Chapter 30 profile Commands
875