ZyXEL Communications MSC1000G User Manual page 113

Figure 49 802.1X PNAC: Port Setup: Slot
The following table describes the labels in this screen.
Table 32 802.1X PNAC: Port Setup: Slot
label
UP
Copy
Port
Enable
Control
Reauthentication
Management Switch Card User's Guide
description
Click UP to go back to the previous screen.
Do the following to copy settings from one port to another port or ports.
1. Select the Select radio button of the port from which you want to copy settings
2. Click Copy.
3. Select to which line card you want to copy the settings.
4. Select to which ports on the line card you want to copy the settings. Use Select All to
select every port. Use Select None to clear all of the check boxes.
5. Click Apply to paste the settings.
This field displays the number of the port.
This field displays whether IEEE 802.1x is turned on or not (V for enabled, - for disabled).
This field displays the IEEE 802.1x port authentication option for a subscriber port.
AUTO - the MSC authenticates all subscribers before they can access the network
through this port.
FORCE AUTHORIZED - allow all connected users to access the network through this port
without authentication.
FORCE UNAUTHORIZED - deny all subscribers access to the network through this port.
This field displays whether the IEEE 802.1x re-authentication option is turned on or not (V
for enabled, - for disabled).
Chapter 4 Access Control List Screens
113