Show Paepvc Session Command - ZyXEL Communications MSC1000G User Manual

The following table describes the counters.
Table 380 show paepvc counter Command Fields
FIELD
ppp lcp config-request
ppp lcp echo-request
ppp lcp echo-reply
pppoe padi
pppoe pado
pppoe padr
pppoe pads
pppoe padt
pppoe srvcname error
pppoe acname error
pppoe generic error

32.3.35 show paepvc session Command

Syntax:
show paepvc session <slot-port>|<slot-port-vpi/vci>
This command displays the PAE PVC session status. The following example displays the session
status of all PAE PVC(s) on port 1 of the line card in slot 2.
ras> show paepvc session 2-1
pvc 2-1-1/33
session state : down
session id
session uptime: 0 secs
acname
srvcname
ras>
32.3.36 show performance Command
Syntax:
show performance <slot-port> curr|15min|1day
This command displays a DSL port's performance counters.
Management Switch Card User's Guide
DESCRIPTION
This field displays the number of PPP config-request packets received.
This field displays the number of PPP echo-request packets received.
This field displays the number of PPP echo-reply packets received.
This field displays the number of PPPoE Active Discovery Initialization (PADI) packets
transmitted.
This field displays the number of PPPoE Active Discovery Offer (PADO) packets
received.
This field displays the number of PPPoE Active Discovery Request (PADR) packets
transmitted.
This field displays the number of PPPoE Active Discovery Session-Confirmation
(PADS) packets received.
This field displays the number of PPPoE Active Discovery Termination (PADT) packets
received/transmitted.
This field displays the number of errors received for which the service-name request
failed.
This field displays the number of errors received when the access concentrator
experienced an error performing the host request.
This field displays the number of unrecoverable errors occurred.
: 0
:
:
Chapter 32 show Commands
967