ZyXEL Communications MSC1000G User Manual page 651

Table 347 acl Commands (continued)
COMMAND
radius
show
dsbcast enable
disable
show
dscp disable
enable
set
show
loopguard disable
enable
Management Switch Card User's Guide
DESCRIPTION
Sets the IP address of the specified external
ip <index> <ip-
RADIUS server (1 or 2).
address>
index: The RADIUS server number.
Sets the external RADIUS server port number of
port <index>
the specified RADIUS server.
<port>
index: The RADIUS server number.
Sets the authentication and encryption key of
secret <index>
the specified RADIUS server.
<secret_key>
index: The RADIUS server number.
secret_key: The authentication encryption key
(<=31 characters).
Displays the external RADIUS server settings.
Turns on the blocking of downstream broadcast
<slot-port>
packets from going to the specified VLAN on the
<vid>
specified port.
Turns off the blocking of downstream broadcast
<slot-port>
packets to go to the specified VLAN on the
<vid>
specified port.
Displays the settings for blocking downstream
<slot>|<slot-
broadcast packets for the specified slot or port.
port>
Stops the DSCP (Differentiated Services Code
<slot-port>
Point) service on the specified slot and port.
DSCP is a field in the header of IP packets for
packet classification purposes. QoS (Quality-of-
Service) uses DSCP to provide different level of
services and priorities. See
page 668
Enables DSCP service on the specified slot and
<slot-port>
port.
Sets DSCP settings.
<codepoint>
<priority>
codepoint: Each number of codepoints
represents a level of service (0~63).
priority: 0~7 (0 is the lowest priority level
and 7 is the highest)
Displays global DSCP settings or for the
[slot]
specified slot.
slot: is between slot 1 and 5 except the MSC
slot.
Disables loop guard on the specified port(s).
<giga-
port>|<slot-
port>
Enables loop guard on the specified port(s). The
<giga-
system shuts down a port if the system detects
port>|<slot-
that packets sent out on the port loop back to
port>
the system.
Note: The loop guard feature cannot be enabled
Chapter 19 acl Commands
Section 19.9 on
for more information.
on ports with Spanning Tree Protocol
(RSTP or MSTP) enabled.
P
8
8
8
1
8
8
8
8
8
8
1
8
8
651