Profile Voip Dsp Show Command - ZyXEL Communications MSC1000G User Manual

Chapter 30 profile Commands
• G.711 voice package interval: 20
• G.723 voice package interval: 30
• G.726 voice package interval: 20
• G.729 voice package interval: 20
The following example shows a command configuring a DSP profile named "digsig4" with the
following settings:
• Codec: G.726 (40 bits), G.726 (32 bits), G.726 (16 bits).
• Min-delay: 30 ms
• Max-delay: 90 ms
• Echo tail: 32 ms
ras> profile voip dsp set digsig4 codec g726-40,g726-32,g726-16 playbuffer
30 90 echotail 32

30.19.4 profile voip dsp show Command

Syntax:
profile voip dsp show [<profile>]
This command displays the settings of the specified DSP profile, or displays the names of all DSP
profiles if none is specified. An example is shown next.
ras> profile voip dsp show
dsp profile(s)
-------------------------
1. DEFVAL
2. digsig4
ras> profile voip dsp show digsig4
dsp profile
codec
playbuff min-delay : 30
playbuff max-delay : 90
echotail
echocancel
vad
g711vpi
g723vpi
g726vpi
g729vpi
30.20 profile voip h248 Commands
Use these commands to set up and manage h248 profiles. h248 profiles map to ports on the VoIP
line cards, and contain the media gateway details.
902
: digsig4
: g726-40 g726-32 g726-16
: 32
: on
: off
: 20
: 30
: 20
: 20
Management Switch Card User's Guide