Show Macff Arp Counter Port Command - ZyXEL Communications MSC1000G User Manual

Chapter 32 show Commands
This command displays the IEEE 802.1d MAC address forwarding table. The following example
displays the IEEE 802.1d MAC address forwarding table on Ethernet port 1.
ras> show mac enet1
vid mac(total:
---- ----------------- -----
1 00:00:04:a0:00:31 enet1
1 00:00:1c:d4:1c:f6 enet1
1 00:00:e2:82:7d:90 enet1
1 00:02:3f:6c:6f:0a enet1

32.3.27 show macff arp counter port Command

Syntax:
show macff counter port <slot-port>
This command displays the subscriber port's MAC forced forwarding ARP request and ARP reply
packet statistics. Here is an example for port 1 on the line card in slot 12.
ras> show macff arp counter port 12-1
slot-port
---------- ---------- ---------- ----------
12-1
32.3.28 show macff arp counter uplink Command
Syntax:
show macff arp counter uplink <slot>
This command displays MAC forced forwarding ARP request and ARP reply packet statistics for the
line card's uplink port that connects the line card to the MSC through the back panel of the chassis.
Here is an example for the line card in slot 12.
ras> show macff arp counter uplink 12
port
------ ---------- ---------- ----------
uplink
32.3.29 show macff status Command
Syntax:
show macff status <slot>
960
52) port
ARP Request
TX RX
0
ARP Request
TX RX RX Drop
0 0
ARP Reply
RX Drop TX
---------- ---------- ----------
0 0
ARP Reply
TX
---------- ---------- ----------
0 0
RX RX Drop
0 0
RX RX Drop
0
Management Switch Card User's Guide
0
0