Sys Commands - ZyXEL Communications MSC1000G User Manual

Chapter 34 sys Commands
Table 387 sys Commands (continued)
COMMAND
timeout
time set
show
timeserver set
show
sync
user delete
disable
enable
online
set
show
version

34.3 sys Commands

Use these commands for system management and maintenance.
34.3.1 sys version Command
Syntax:
sys version
1038
DESCRIPTION
Specify for how many minutes an administrator's
<0~360>
configuration session can remain idle before the
system automatically logs the administrator out.
Sets the system time.
<hh> [<mm> [<ss>]]
Displays the current system time.
Clears the time server settings.
none
Sets the time service protocol and IP address of a
daytime <ip-
time server.
address> [sync]
or
sync:
time|ntp <ip-
address> <utc[<+|-
>0100~1200]>
[sync]
Displays the time server settings.
Gets the time and date from a predefined time
server.
Removes a user account.
<name>
Stops a user from logging in.
<name>
Allows a user to log in.
<name>
Displays information about online users that are
logged into the switch. * denotes your session.
Sets a user account and its level of access
<username>
privileges (1 ~ 14).
<password>
<privilege>
Displays authentication settings and user
accounts.
Displays the system's general information such as
the model name and firmware version.
Gets the time and date.
Management Switch Card User's Guide
P
14
8
1
8
8
1
8
14
14
14
1
14
1
1