Cfm Ma Screen - ZyXEL Communications MSC1000G User Manual

Chapter 13 Switch Screens

13.19.1 CFM MA Screen

Click an MD index number in the Switch > CFM screen to display the screen shown next. Use this
screen to configure MAs, EP ID.
Figure 373 CFM Maintenance Association
The following table describes the labels in this screen.
Table 287 CFM Maintenance Association
LABEL
MD Name
Index
MA Name
Primary VLAN
CCI Interval
No. of ep
Modify
Delete
MA Name
Primary VLAN
540
DESCRIPTION
This displays the MD name which you want to configure MAs, endpoint IDs, VLAN IDs in
this screen.
This field displays the index number of an MA. Click an index number to configure the
associated endpoint under this MA.
This field displays the descriptive name of the MA.
This field displays the primary VLAN ID of the MA.
This field displays how often connectivity check messages are sent from an end point
under this MA.
4 = 1 second, 5 =10 seconds, 6 = 1 minute, 7 = 10 minutes.
This field displays the number of the end points under this MA.
Select an MA and click Modify to bring the MA information in this screen for modification.
Select an MA and click Delete to remove an MA.
Type a name (up to 15 printable ASCII characters) for this MA. This is for identification
purposes.
Type the primary VLAN ID (0~4094) for this MA.
Management Switch Card User's Guide