Vlan Set Command - ZyXEL Communications MSC1000G User Manual

Chapter 35 vlan Commands
The following example removes static VLAN entry 27.
ras> vlan delete 27
35.3.2 vlan disable Command
Syntax:
vlan disable <vid>
This command turns off the static VLAN.
The following example turns off static VLAN entry 27.
ras> vlan disable 27
35.3.3 vlan enable Command
Syntax:
vlan enable <vid>
This command turns on the static VLAN.
The following example turns on static VLAN entry 27.
ras> vlan enable 27
35.3.4 vlan name Command
Syntax:
vlan name <vid> <name>
where
<vid>
<name>
This command sets the name for an entry in the static VLAN table.
The following example names static VLAN entry 27 "sub1".
ras> vlan name 27 sub1

35.3.5 vlan set Command

Syntax:
vlan set <vid> <giga-port> <fix|forbid|normal> <tag|untag>
1060
= The VLAN ID [1 – 4094].
=
A name to identify the SVLAN entry.
Management Switch Card User's Guide