ZyXEL Communications MSC1000G User Manual page 190

Chapter 8 Multicast Screens
The following table describes the labels in this screen.
Table 76 IGMP Port Setup
LABEL
Slot
Port
Load
Filter Profile
Bandwidth
IGMP Count
IGMP Message
Count
Apply
Cancel
Copy
ID
190
DESCRIPTION
Select the number of a line card's slot.
Select the number of a DSL port on the line card.
Click Load to retrieve the port's IGMP filter profile setting and display it in the Profile drop-
down list box.
Select an IGMP filtering profile.
Select Enable and enter the maximum accumulated bandwidth (in Kbps) allowed for the
multicast traffic flowing through the port.
Select Enable and enter the maximum number of multicast groups of which the port can be
a member.
Select Enable and enter the maximum number of multicast packets allowed to flow through
the port in a second.
Click Apply to have the specified DSL port use the IGMP port setting.
Click Cancel to close the screen without saving your changes.
Do the following to copy IGMP port settings from one DSL port to another DSL port or ports.
1. Select the radio button of the DSL port from which you want to copy IGMP filter profile
settings.
2. Click Copy to open the following screen.
Figure 114 IGMP Port Setup: Copy
3. Select a line card to which you want to copy settings.
4. Select the check boxes of the DSL ports on the line card to which you want to copy the
IGMP filter profile setting. Click Select All to mark all of the port check boxes or click
Select None to clear all of the port check boxes.
5. Click Apply to copy the IGMP filter settings to all of the ports that you have selected in
this screen. Click Cancel to close the screen without saving changes.
This column lists the slot numbers of the line cards. Click the ID number of an active line
card to go to a screen where you can copy a DSL port's IGMP filter profile setting to another
DSL port.
Management Switch Card User's Guide