ZyXEL Communications MSC1000G User Manual page 228

Chapter 9 Subscriber Port Setup Screens
The following table describes the fields in this screen.
Table 100 VDSL Port Setup: Advanced
LABEL
UP
General
Enable
Customer Info
TEL
VDSL Profile
Mode
PMask
Alarm Profile
PVID/ Priority
IPQos Profile
VDSL Feature
Optionmask
228
DESCRIPTION
Click this to return to the previous screen.
Select this to turn on the VDSL port.
Enter information to identify the subscriber connected to this VDSL port. You can use up to
31 printable English keyboard characters (including spaces and hyphens).
Enter information to identify the telephone number of the subscriber connected to this
VDSL port. You can use up to 15 English keyboard characters (including spaces and
hyphens).
Select a VDSL line profile to assign to this port in the first drop-down list box. Use the VDSL
Profile screen to configure VDSL port profiles.
Select a profile defined by the VDSL standard from the second drop-down list box. Select
auto to automatically detect the protocol used on the connected line. Select adsl2 or
adsl2+ to specify the only protocol that can be used on this port. Refer to
page 206 for information on other VDSL2 profiles used in this screen.
Select this and click the 32 option bits link to apply standard mask(s) to the VDSL port. The
following screen displays.
Figure 141 PMask
Select one or more standard mask to use on this port and click Apply. The displayed PMask
value changes according to your setting. For example, 0x00003FF7 displays if you select
ALL; 0x00002000 displays if you only select G.993.2 17a.
Select an alarm profile to define the thresholds that trigger an alarm on the port when
exceeded.
Specify the default VLAN ID (1~4094) and IEEE 802.1p priority (0~7) to add to untagged
frames received on this port.
If an untagged frame matches a PVLAN setting, the system uses the PVLAN setting instead.
Tagged frames are handled according to the VDSL line card's VLAN setup.
Select a QoS (Quality of Service) profile from the drop-down box to classify and prioritize
application traffic. Use the Profile > IPQoS screen to configure IPQoS profiles.
This field displays the bit mask that represents the features that have been disabled for this
connection. Click the bit mask number to open the Option Mask screen where you can
disable attributes for the port. This is for advanced troubleshooting.
Table 9.2.4 on
Management Switch Card User's Guide