ZyXEL Communications MSC1000G User Manual page 929

Table 368 show Commands (continued)
COMMAND
ima groupdetail
link
performance
Management Switch Card User's Guide
DESCRIPTION
Displays an IMA group's settings.
<slot-
group>
slot: The number of the slot where the IMA line
card is installed.
group: An IMA group ID.
Displays an E1 line's packet statistics.
<slot-
group>
Note: The link must be in the specified IMA group.
<link-id>
Displays an IMA group's performance information
group
collected during the specified time period.
<slot-
group>
curr15: Statistics are collected in the current
curr15|curr
quarter of an hour. For example, if you use this
day|last24h command at 2:25, this section displays statistics
collected since 2:15.
r|[96q <sq>
<eq>]|[7day
currday: Statistics are collected today. For
<sd> <ed>]
example, if you use this command at 10:25, this
section displays statistics collected since mid-night
till 10:25.
last24hr: Statistics are collected in the past 24
hours. For example, if you use this command at
10:25, this section displays statistics collected since
10:25 yesterday till 10:25 today.
96q: Statistics are collected during the specified
starting and ending quarter hours of the past 96
quarter hours (=24 hours).
• sq: starting quarter hours, 1~96
• eq: ending quarter hours, 1~96, ending quarter
hours must be equal to or greater than starting
quarter hours
7day: Statistics are collected during the specified
starting and ending days of the past 7 days (=one
week).
• sd: the starting day, 1~7
• ed: the ending day, 1~7, ending day must be
equal to or greater than starting day
Chapter 32 show Commands
P
1
1
1
929