ZyXEL Communications MSC1000G User Manual page 257

The following table describes the fields in this screen.
Table 114 PVC Setup
LABEL
PVC Table
Slot
Port
Load
Index
VPI/VCI
Profile
MUX
Type
PVID
Priority
Mvlan
usrate
limiting
usrate limit
(kbps)
Select
Modify
Management Switch Card User's Guide
DESCRIPTION
This table displays the PVCs that are configured for the selected port.
Select the number of a line card's slot. The corresponding subscriber port setup screen for the
type of line card you selected automatically displays.
Select the number of a DSL port on the line card.
Click Load to display the port's PVC settings in the PVC Table.
This is the number of the PVC on this port. Click a number to open a screen where you can add
the PVC to more VLANs (or remove it from VLANs).
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). The VPI
and VCI identify a channel on this port.
This field displays the ATM profile that this channel uses.
This field displays the encapsulation type (llc or vc) for this channel.
This field shows that the channel is a PVC.
This field displays the PVID (Port VLAN ID) to assign to untagged frames received on this
channel.
This field displays the priority value (0 to 7) that the line card adds to frames that come in on
this PVC without a (IEEE 802.1p) priority tag.
This field displays the PVC's current multicast VLAN setting. "-" indicates the multicast VLAN is
not active while "V" indicates the multicast VLAN is active.
This field displays whether upstream data rate limit is enabled or not.
This field displays the configured maximum upstream data rate in kbps.
Select a PVC's radio button and then use the Modify, Copy or Delete button.
Click Modify to display the selected PVC's settings in the fields above so you can edit them.
Chapter 9 Subscriber Port Setup Screens
257