ZyXEL Communications MSC1000G User Manual page 193

Figure 116 IGMP History
The following table describes the related labels in this screen.
Table 78 IGMP History
LABEL
check box
ID
Enable
Entries
Last Enable
Last Flush
Last Upload
Disable
Enable
Flush
FTP Upload
IP Address
Account
Password
Filename
Apply
FTP Status
Management Switch Card User's Guide
DESCRIPTION
Select this and the action (Disable, Enable or Flush), then click Apply to perform the
action.
This field displays the slot number of a VLC13xx line card.
This field displays whether IGMP historical data collection is currently enabled (v) or not (-).
This field displays how many records of IGMP historical data now are stored on the system.
This field displays when the slot's IGMP historical data collection was enabled.
This field displays when the slot's IGMP historical data was removed last time.
This field displays when the slot's IGMP historical data was uploaded to an FTP server last
time.
Select this to disable IGMP historical data collection for the slot.
Select this to enable IGMP historical data collection for the slot.
Select this to remove all the slot's IGMP historical data from the system.
Select this to upload the slot's IGMP historical data to the FTP server specified below.
Enter the IP address of the FTP server.
Enter the user name to log into the FTP server.
Enter the password of the user account.
Enter the file name to store the uploaded IGMP historical data on the FTP server.
Click Apply to save the changes in this screen to the system's volatile memory. The system
loses these changes if it is turned off or loses power, so use the Config Save link on the
navigation panel and then the Save button to save your changes to the non-volatile memory
when you are done configuring.
This text box displays the FTP transmission status after you select FTP Upload and click the
Apply button above.
Chapter 8 Multicast Screens
193