29.4.4 port adsl annexm disable Command
Syntax:
port adsl annexm disable <slot-port>
This command turns off the Annex M double upstream feature on the specified ADSL2/2+ port(s).
The following example turns off the Annex M feature for port 5 on the line card in slot 7.
ras> port adsl annexm disable 7-5
29.4.5 port adsl annexm enable Command
Syntax:
port adsl annexm enable <slot-port>
This command turns on the Annex M double upstream feature on the specified ADSL2/2+ port(s).
This has the upstream connection use tones 6 to 63.
The following example turns on the Annex M feature for port 5 on the line card in slot 7.
ras> port adsl annexm enable 7-5
29.4.6 port adsl annexi disable Command
Syntax:
port adsl annexi disable <slot-port>
This command turns off the Annex I all digital mode feature on the specified ADSL2/2+ port(s).
The following example turns off the Annex I feature for port 5 on the line card in slot 7.
ras> port adsl annexi disable 7-5
29.4.7 port adsl annexi enable Command
Syntax:
port adsl annexi enable <slot-port>
This command turns on the Annex I all digital mode feature on the specified ADSL2/2+ port(s).
With Annex I, the ADSL connection uses the full spectrum of the physical line and the user can not
use POTS or ISDN service.
The following example turns on the Annex I feature for port 5 on the line card in slot 7.
ras> port adsl annexi enable 7-5
Management Switch Card User's Guide
Chapter 29 port Commands
777