Port Tlspvc Show Command - ZyXEL Communications MSC1000G User Manual

<vid>
This command sets the second VLAN tag to add to the packets from the PVC.
The following example adds a VLAN tag (
( ) on port
1/33
ras> port tlspvc set 3-2-1/33 DEFVAL llc 100 12

29.40.3 port tlspvc show Command

Syntax:
port tlspvc show <slot>|<slot-port>|<slot-port-vpi/vci>
This command displays the TLS settings for the specified slot/port/PVC.
ras> port tlspvc show 3-2
pvc
-------------- ------- ----- ------ ---- -------------------
3-2-1/33
ras>
29.41 port vdsl Commands
Use the
port vdsl
29.41.1 port vdsl alarmprof Command
Syntax:
port vdsl alarmprof <slot-port> <profile>
This command sets the VDSL port(s) to use the specified alarm profile.
29.41.2 port vdsl compatible Command
Syntax:
port vdsl compatible <slot-port> none|adsl2|adsl2+
where
none
adsl2
Management Switch Card User's Guide
= The VLAN ID the switch adds to the traffic on the PVC. This is the VLAN ID known
in the service provider's network.
Note: Make sure this VLAN ID is not already used for MVLAN or PAE.
of the line card in slot
2
type mux pvid
tls llc 100
commands to configure the subscriber VDSL ports.
= Has the VDSL2 services use their normal frequency band plan.
= Has the VDSL2 services not use the ADSL2 frequency bands to avoid possible interference
with ADSL2 services provided by another device on the same bundle of lines.
) to the traffic using the
100
.
3
pri profile
1 DEFVAL
Chapter 29 port Commands
ATM profile on PVC
DEFVAL
825