ZyXEL Communications MSC1000G User Manual page 274

Chapter 9 Subscriber Port Setup Screens
The following table describes the labels in this screen.
Table 124 IPBPVC
LABEL
Slot
Port
Load
Index
VPI/VCI
Profile
Type
IPBPVC
PVID
Priority
Select
Modify
Copy
Delete
VPI/VCI
274
DESCRIPTION
Use this drop-down list box to select the slot that contains a line card with a port for which you
wish to set up an IP bridge PVC.
Use this drop-down list box to select a port for which you wish to set up an IP bridge PVC.
Click Load to display the port's IPB PVC settings in the fields below.
This field displays the index number of a channel on this port. Click the index number to go to
a screen where you can configure the IPB PVC's VLAN settings (see
275).
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). The VPI
and VCI identify a channel on this port.
This shows which ATM profile this channel uses.
This field displays IPB to indicate that this is an IPB PVC.
llc and vc are for a PVC running on Ethernet (IPoE), llc_r and vc_r are for a PVC running on
ATM (IPoA).
This is the VLAN ID assigned to frames received on this channel.
This is the priority value (0 to 7) added to incoming frames without a (IEEE 802.1p) priority
tag.
Select the radio button in the Select column for an entry and click Modify to be able to edit
the entry, Copy to duplicate the entry's settings on another port, or Delete to remove the
entry.
Select the radio button in the Select column for an entry and click Modify to be able to edit
the entry.
Do the following to copy the settings you configure above to another port or ports.
1. Click Copy.
2. Select to which line card you want to copy the settings.
3. Select to which ports on the line card you want to copy the settings. Use Select All to
select every port. Use Select None to clear all of the check boxes.
4. Click Apply to paste the settings.
Select the radio button in the Select column for an entry and click Delete to remove the
entry.
Type the Virtual Path Identifier and Virtual Circuit Identifier for a channel on this port.
Section 9.19.1 on page
Management Switch Card User's Guide