Voip Sip Dialplan Set Command - ZyXEL Communications MSC1000G User Manual

Chapter 36 voip Commands
This command displays settings for all SIP profiles configured on this line card, or settings for the
SIP protocol profile(s) that refer to specified dial plan table. An example is shown next.
ras> voip sip dialplan map dialplan1
Dial plan profile(s) list that refer to "dialplan1" dial plan table:
name
--------------------------------
dialplan_profile
name : dialplan1
slot
---- -----------------------------------------------------------------------
-
123456789012345678901234567890123456789012345678901234567890123456789012
3 ------------------------------------------------
4 ------------------------------------------------
5 ------------------------------------------------
6 ------------------------
7 ------------------------------------------------
8
9 ------------------------------------------------
10 -----------------------------------------------------------------------
-

36.13.3 voip sip dialplan set Command

Syntax:
voip sip dialplan set <name> <pattern> <num-of-prefix-cut> <sip-server> [<prefix-
add-digits> <number-of-digits> <interdigit-timeout>]
where
<name>
1086
port
1 2 3
=
The dial plan table name (up to 31 characters).
4 5 6
Management Switch Card User's Guide
7