Profile Profsvr Show Command - ZyXEL Communications MSC1000G User Manual

30.14.1 profile profsvr show Command

Syntax:
profile profsvr show
This command displays the current profile server setting.
ras> profile profsvr show
mode :server mode
no Client Ip
---- ---------------
01
30.14.2 profile profsvr mode Command
Syntax:
profile profsvr mode client|server
This command sets the profile server operation mode.
ras> profile profsvr mode server
30.14.3 profile profsvr clientlist set Command
Syntax:
profile profsvr clientlist set <ip-address> <type>
where
<type>
This command adds an entry to the profile server client list. When the IES is in server mode, use
this command to add entries to the list of client IES's.
The following example sets a profile server client entry for an IES at IP address 1.2.3.4. If there are
any unused profiles on this client during the synchronization process, they will be left on the client.
ras> profile profsvr clientlist set 1.2.3.4 0
30.14.4 profile profsvr clientlist delete Command
Syntax:
profile profsvr clientlist delete <ip-address>
Management Switch Card User's Guide
type
------
1.2.3.4 0
=
A profile client IES may have unused profiles on it (profiles that are not mapped to any
ports).
Use to leave these unused profiles on the client IES when synchronizing the profiles.
0
Use to delete these unused profiles from the client IES when synchronizing the
1
profiles.
Chapter 30 profile Commands
885