Chapter 9 Subscriber Port Setup Screens
9.8.7 VDSL Port Setup Advanced: Handshake Tx PSD
Use this section of the screen to adjust the PSD level of each specific ITU-T G.994.1 (G.hs) carrier
tone (such as A43, B43 and so on), that is used during handshaking.
Note: A higher PSD level increases both the distance signals can be transmitted and
the crosstalk impact.
Figure 146 VDSL Port Setup: Advanced (Handshake Tx PSD)
9.8.8 VDSL VLAN Setup
Click Port > VDSL in the navigation panel to open the VDSL Port Setup screen. Select a VDSL
line card ID, a port index number and click Setup next to VLAN to open the following screen. Use
this screen to add the VDSL port to VLANs (or remove it from VLANs) and configure the TLS
(Transparent LAN Service) settings.
Figure 147 VDSL VLAN Setup
238
Management Switch Card User's Guide