ZyXEL Communications MSC1000G User Manual page 242

Chapter 9 Subscriber Port Setup Screens
Figure 149 XVLAN Example
9.8.10.1 VDSL XVLAN Setup
Click Port > VDSL in the navigation panel and then click the Setup button next to XVLAN to open
the Xvlan Setup screen. Use this screen to configure XVLAN settings for individual ports.
Figure 150 VDSL Port Setup: Xvlan Setup
The following table describes the fields in this screen.
Table 107 VDSL Port Setup: Xvlan Setup
LABEL
Slot
Port
Load
Index
Cvid
242
DESCRIPTION
Select the number of a line card's slot. The corresponding subscriber port setup screen for the
type of line card you selected automatically displays.
Select the number of a DSL port on the line card.
Click Load to display the port's settings in the fields below.
This is the number of an XVLAN entry on this port.
This is the original customer VLAN ID. When the port receives traffic from the subscriber with
this VID, it applies this XVLAN entry's settings before forwarding it to the service provider's
network.
Management Switch Card User's Guide