Configuring Subnet Based Vlan - ZyXEL Communications MSC1000G User Manual

You configure a subnet based VLAN with priority 6 and VID of 100 for traffic received from IP subnet
172.16.1.0/24 (voice services). You also have a subnet based VLAN with priority 5 and VID of 200
for traffic received from IP subnet 192.168.1.0/24 (video services). Lastly, you configure VLAN with
priority 3 and VID of 300 for traffic received from IP subnet 10.1.1.0/24 (data services). All
untagged incoming frames will be classified based on their source IP subnet and prioritized
accordingly. That is video services receive the highest priority and data the lowest.
Figure 64 Subnet Based VLAN Application Example
172.16.1.0/24
VID = 100

4.23 Configuring Subnet Based VLAN

Click ACL > Subnet VLAN to display the configuration screen as shown.
Note: Subnet based VLAN applies to un-tagged packets and is applicable only when you
use IEEE 802.1Q tagged VLAN.
Figure 65 ACL > Subnet VLAN
Management Switch Card User's Guide
Tagged Frames
Untagged
Frames
192.168.1.0/24
10.1.1.0/24
VID = 200
VID = 300
Chapter 4 Access Control List Screens
Internet
Internet
129