ZyXEL Communications MSC1000G User Manual page 329

Management switch card
Hide thumbs Also See for MSC1000G:
Table of Contents

Advertisement

Figure 216 IMA > MGTPVC Setup: Slot
The following table describes the fields in this screen.
Table 154 IMA > MGTPVC Setup: Slot
LABEL
UP
Delete
Previous 10
Previous
Page X of X
Next
Next 10
Index
Group
VPI/VCI
Profile
PVID / Priority
MUX
Ip
Gateway
Select
Management Switch Card User's Guide
DESCRIPTION
Click this to return to the previous screen.
Click Delete to remove the selected management PVC(s).
Click Previous 10 to show the preceding 10 pages of information.
Click Previous to show the preceding screen if the information cannot be displayed in one
screen.
This identifies which page of information is displayed and the total number of pages of
information.
Click Next to show the following screen if the information cannot be displayed in one screen.
Click Next 10 to show the following 10 pages of alarms.
This is the number of the management PVC.
This is the number of an IMA group on the line card.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). The VPI
and VCI identify a channel on this group.
This field displays the ATM profile that this channel uses.
This field displays the service provider's VLAN ID and priority settings that this channel uses.
The PVID here is the service provider's VLAN ID (the outer VLAN tag) that the line card
assigns to untagged frames received on this PVC.
Priority is the IEEE 802.1p priority level for the service provider tag that the line card adds
to untagged frames that come in on this PVC. "0" is the lowest priority level and "7" is the
highest.
This field displays the encapsulation type (llc or vc) for this channel.
This field displays the IP address the remote IMA device uses to connect with the IMA line
card for management traffic transmission.
This field displays the IP address a management computer uses to connect with the IES and
manage management traffic.
Select one or more PVCs' check boxes and then use the Delete button to remove it (or
them). Use the Select All check box to select all of the PVCs for all of the line card's groups.
Chapter 10 IMA Screens
329

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msc1024gMsc1224gMsc1024gbMsc1024gcMsc1224gb

Table of Contents