Switch Bcasctrl Commands - ZyXEL Communications MSC1000G User Manual

"V" displays for ports that have bandwidth control enabled "-" displays for ports that do not.

33.5 switch bcasctrl Commands

Use the
switch bcasctrl
33.5.1 switch bcastctrl threshold Command
Syntax:
switch bcasctrl threshold <giga-port> <bc-limit> <mc-limit> <uu-limit>
where
<giga-port>
<bc-limit>
<mc-limit>
<uu-limit>
This command sets the limitations of broadcast, multicast and unknown unicast packets, in packets
per second for each Gigabit Ethernet port.
This example sets the subtending 1 interface to accept up to 80,000 broadcast packets, 100,000
multicast packets and 60,000 unknown unicast packets per second.
ras> switch bcastctrl threshold sub1 80000 100000 60000
33.5.2 switch bcastctrl show Command
Syntax:
switch bcasctrl show
This command displays the broadcast storm control settings. The following shows an example.
ras> switch bcastctrl show
port broadcast(pkt/s) multicast(pkt/s) uucast(pkt/s)
---- ---------------- ---------------- ----------------
sub1
sub2
up1
up2
ras>
Management Switch Card User's Guide
commands to configure broadcast storm control.
= This represents Gigabit Ethernet uplink ports, subtending ports or all ports. Use
sub1|sub2|up1|up2|all i
trunking is enabled.
= Sets how many broadcast packets the interface is allowed to receive per second.
0~262143, use -1 to disable.
=
Sets how many multicast packets the interface is allowed to receive per second.
0~262143, use -1 to disable.
=
Sets how many unknown unicast packets the interface is allowed to receive per
second. 0~262143, use -1 to disable.
80000 100000
- -
- -
- -
Chapter 33 switch Commands
f trunking is not enabled. Use
60000
-
-
-
if
sub|up|all
993