the fastleave timer expires. In IPTV applications, this feature allows users to quickly switch between
video channels.
28.5.1 multicast igmp fastleave enable Command
Syntax:
multicast igmp fastleave enable
This command activates multicast fastleave on the system.
28.5.2 multicast igmp fastleave disable Command
Syntax:
multicast igmp fastleave disable
This command deactivates multicast fastleave on the system.
28.5.3 multicast igmp fastleave timer Command
Syntax:
multicast igmp fastleave timer
This command sets the time a device has to leave a multicast group.
The following example specifies 10 seconds as the time the device has to leave a multicast group.
ras> multicast igmp fastleave timer 10
28.6 multicast igmp Commands
Use these commands to enable or disable IGMP proxy or IGMP snooping.
28.6.1 multicast igmp disable Command
Syntax:
multicast igmp disable
This command deactivates IGMP on the system. All IGMP packets will be ignored.
28.6.2 multicast igmp enable Command
Syntax:
multicast igmp enable proxy|snooping [igmpv2|igmpv3|mldv1|mldv2]
Management Switch Card User's Guide
Chapter 28 multicast Commands
743