ZyXEL Communications MSC1000G User Manual page 850

Chapter 30 profile Commands
Table 366 profile Commands (continued)
COMMAND
set
show
shdsl delete
map
set
show
vdsl delete
map
850
<profile> <ingress-rate>
<egress-rate>
[<profile>]
<profile>
<profile>
<profile> <min-rate> <max-
rate> [<annex> <wire_pair>
<pms> [margin]]
[<profile>]
<profile>
<profile>
DESCRIPTION
Configures an Ethernet subscriber line
ingress and egress rate profile.
Displays the name(s) of the rate limit
profile(s) you have configured. Specify a
profile to see it's details.
Removes an unreferenced SHDSL port
settings profile.
Displays which SHDSL ports reference this
profile.
Creates a profile of SHDSL port settings.
min-rate: The minimum rate (192~4096
Kbps).
The maximum rate (192~4096
:
max-rate
in Kbps).
Region setting:
: annexa|
annex
.
annexb
The number of wire pairs to be
:
wire-pair
used. Choose 2wire|4wire|mpair4.
pmms: Line probing. Options are:
lp_off: Disables the line probe.
lp_on_cur: Enables the line probe based
on the current target SNR margin.
lp_on_wc: Enables the line probe based
on the worst case target snr margin.
The current condition target
:
curr-margin
SNR margin (-10~21 dB).
margin: The current noise margin or worst
case noise margin (-10~21 dB).
Lists the SHDSL port setting profiles or a
specific profile's settings.
Removes a VDSL port settings profile.
Displays which VDSL ports reference this
profile.
Management Switch Card User's Guide
P
8
1
8
1
8
1
8
1