ZyXEL Communications MSC1000G User Manual page 177

Table 73 IMA Loopback (continued)
LABEL
F5 end2end
F5 segment
Management Switch Card User's Guide
DESCRIPTION
Select this to perform an ATM F5 end to end loopback test.
Group: Select the number of an IMA group.
VPI/VCI: Enter the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) of a channel
in this group.
Select this to perform an ATM F5 segment loopback test.
A segment ID identifies an ATM device. Use this loopback test to only have the device with the
specified segment ID return the F5 loopback testing cells.
Group: Select the number of an IMA group.
VPI/VCI: Enter the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) of a channel
in this group.
segment ID: Specify a 16-byte segment ID for this loopback test. For example,
0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF.
Chapter 6 Diagnostic Screens
177